3D printing of chocolate, a new approach

From:FoodProcessing

Advances in three-dimensional (3D) printing technology have focused on edible material, enabling it to be shaped into unique and complex 3D designs. Researchers at the Singapore University of Technology and Design (SUTD) have now developed a method for the 3D printing of chocolate-based products at room temperature by cold extrusion instead of the conventional hot-melt extrusion method. The new approach eliminates the need for stringent temperature controls, providing further potential for 3D printing of temperature-sensitive food.

The hot-melt extrusion method is widely used in 3D printed chocolates where the chocolate is required to be between the temperatures of 31 to 36°C so that it can be melted and dispensed accordingly. While this method has its advantages in simplicity and accessibility, the narrow range of operating temperature can be highly restrictive and inflexible.

Conversely, cold extrusion does not require the manipulation of temperature as it depends solely on the rheology of printing ink that is added to chocolate at the operating temperature. However, due to the lack of inks possessing suitable rheological properties, cold extrusion in 3D printed chocolate has not been demonstrated to date.

To bridge this gap, researchers from SUTD’s Soft Fluidics Lab developed a new approach, ‘Chocolate-based Ink 3D Printing’ (Ci3DP), to print chocolate-based inks at room temperature by cold extrusion.

Using the Ci3DP approach, readily available chocolate products such as syrups and pastes were mixed with cocoa powder to alter the rheology of the ink. Chocolate-based inks with high concentrations of cocoa powders exhibited shear-thinning properties with high viscosity; the inks also possessed a toothpaste-like property that did not flow at rest.

To highlight this capability, 3D models consisting of chocolate syrups and pastes were demonstrated. The same method was extended to the fabrication of a chocolate with different textures by using multiple types of inks. For instance, a piece of chocolate was fabricated with a semi-solid enclosure and liquid filling at the same time, further demonstrating the flexibility that this approach provides.

Images of 3D printed structures printed by direct chocolate-based ink 3D printing. The dragon was directly printed on a biscuit.

"The simplicity and flexibility of Ci3DP offers great potential in fabricating complex chocolate-based products without the need for temperature control," said the lead author of the research paper, Dr Rahul Karyappa from SUTD.

Principal Investigator Assistant Professor Michinao Hashimoto from SUTD added, "Ci3DP is capable of fabricating customised food in a wide range of materials with tailored textures and optimised nutritional content. This new approach also widens the industry's capabilities in 3D food printing, allowing for the cold-extrusion of food products that are temperature-sensitive."

Further scientific details are available here.

Image credit: ©stock.adobe.com/au/dule964

Claims: 
The copyrights of articles in the website belong to authors. Please inform us if there is any violation of intellectual property and we will delete the articles immediately.